Alloy Guide Sheet Terms of Use

Use Good Design Principles

1. St. Paul Foundry is providing this information on metal characteristics for informational purposes only. Before making a final decision on alloy selection consider the following and all other appropriate design and specification principles. Please note that this is not an exhaustive list.

2. Consult the appropriate specification from an accredited specifying body (ASTM, SAE, Federal or Military) to determine current minimum values of this alloy.

3. Use appropriate design safety factors.

4. Use Failure Modes and Effects Analysis to help identify possible weaknesses in designs and specifications.

5. Use computerized stress analysis tools.

6. Use appropriate certification requirements for your casting suppliers. These may include test bars, chemical certifications, radiography, dye penetrant or other non-destructive testing methods.

7. Test your design to failure in a controlled environment. Then test it to failure in a simulation of its end use.

8. You and you alone are responsible for the suitability of your design and the materials that you select.

Disclaimer

WHILE EVERY EFFORT IS MADE BY ST. PAUL FOUNDRY (SPF) TO ENSURE ACCURACY, THIS INFORMATION IS PROVIDED FOR GENERAL INFORMATION PURPOSES ONLY AND NOT FOR ANY OTHER PURPOSE. BY ACCESSING THIS INFORMATION, YOU AGREE THAT IT MAY BE REVISED AT ANY TIME, IT IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, THAT NO WARRANTY OR REPRESENTATION IS MADE ABOUT ITS CONTENT OR SUITABILITY FOR ANY PURPOSE, AND THAT SPF EXPRESSLY DISCLAIMS WARRANTIES OF MERCHANTABILITY AND FITNESS. YOU ASSUME ALL RISK AND LIABILITY FOR ANY LOSS, DAMAGE, CLAIM, OR EXPENSE RESULTING FROM YOUR REVIEW, USE, OR POSSESSION OF THIS INFORMATION.



Skip Navigation LinksC86200 '423' High Strength Yellow Brass
St. Paul
Foundry
Banner
Great Castings          St. Paul Foundry 954 Minnehaha Ave West St. Paul MN 55104 651-488-5567 www.stpaulfoundry.com

 Simplifying the Supply Chain For High Knowledge Content Components
ISO 9001:2008  

C86200 HIGH STRENGTH YELLOW BRASS
Aliases
CDA NUMBER C86200
Common Name 423
Alias C862
Alias 862
Alias 90,000 Tensile
Alias High Strength Yellow Brass
SAE 430A
Nearest Applicable Casting Standards
ASTM (B Series) B584
SAE (J Series) 461, 462 (was 430A)
Federal (QQ-C- Series) 390
Military (Mil-C- Series) 22229
Specification Composition
Minimum Maximum
Copper (Cu) 60 66
Tin (Sn) 0.2
Lead (Pb) 0.2
Zinc (Zn) 22 28
Iron (Fe) 2 4
Nickel (Ni) 1
Aluminum (Al) 3 4.9
Manganese (Mn) 2.5 5
Copper + Sum of Named Elements 99
Specification Properties
(Heat Treat 'F' Denotes As Cast) Heat Treat State Minimum
Tensile Strength (ksi) F 90
Yield Strength (.5% extension under load) (ksi) F 45
Elongation (2 inch gauge length) (%) F 18
Typical Properties
Heat Treat State Typical
Reduction of Area (%) 20
Proportional Limit (ksi) 25
Modulus of Elasticity (ksi) 15000
Hardness (Brinell) (HB @ 3000kg) 180
Machinability (% of free cutting brass) 30
Impact Strength (Izod) (ft-lb) 12
Compressive Strength (0.001 in. set/in.) (ksi) 51
Melting Range (Liquidus-Solidus)(F) 1650-1730
Coefficient of Thermal Expansion (per F @ 68-400F) 0.0000120
Thermal Conductivity (Btu/sq.ft/ft./hr/F @ 68F) 20.5
Specific Heat (Btu/lb/F @ 68F) 0.09
Electrical Conductivity (% IACS @ 68F) 7.5
Density (lb/cu.in. @ 68F) 0.288
Pouring Temperature (Light Castings) (F) 1950-2150
Pouring Temperature (Heavy Castings) (F) 1800-1950
Patternmakers Shrinkage (in/ft) 1/4
Drossing High
Gassing Low
Fluidity Medium
Shrinkage High
Comments
Wear Resistance: Outstanding
Corrosion Resistance*
*While corrosion reistance is listed for food products, certain alloys may be unacceptable for other reasons.
Calcium Hydroxide Not Recommended
Carbon Tetrachloride, Dry Excellent Resistance
Calcium Hypochlorite Not Recommended
Cane Sugar Syrups Excellent Resistance
Carbonated Beverages Not Recommended
Carbon Dioxide, Dry Excellent Resistance
Carbon Dioxide, Moist Not Recommended
Carbon Tetrachloride, Moist Acceptable
Chlorine, Dry Excellent Resistance
Chlorine,Moist Not Recommended
Chromic Acid Not Recommended
Citric Acid Excellent Resistance
Copper Sulfate Not Recommended
Cottonseed Oil Excellent Resistance
Calcium Chloride (alkaline) Not Recommended
Toluene Acceptable
Ethers Excellent Resistance
Tartaric Acid Excellent Resistance
Asphalt Excellent Resistance
Trichlorethylene, Dry Excellent Resistance
Turpentine Excellent Resistance
Varnish Excellent Resistance
Vinegar Not Recommended
Water, Acid Mine Not Recommended
Water, Condensate Excellent Resistance
Water, Potable Acceptable
Whiskey Not Recommended
Zinc Chloride Not Recommended
Trichlorethylene, Moist Excellent Resistance
Creosote Not Recommended
Sulfuric Acid, 90% to 95% Not Recommended
Ethylene Glycol Excellent Resistance
Ferric Chloride,Sulfate Not Recommended
Ferrous Chloride, Sullate Not Recommended
Formaldehyde Excellent Resistance
Formic Acid Acceptable
Freon Excellent Resistance
Fuel Oil Excellent Resistance
Furfural Excellent Resistance
Gasoline Excellent Resistance
Gelatin Excellent Resistance
Glucose Excellent Resistance
Zinc Sulfate Not Recommended
Sodium Peroxide Acceptable
Potassium Hydroxide Not Recommended
Potassium Sulfate Not Recommended
Propane Gas Excellent Resistance
Sea Water Not Recommended
Soap Solutions Not Recommended
Sodium Bicarbonate Excellent Resistance
Sodium Bisulfate Not Recommended
Sodium Carbonate Not Recommended
Sodium Chloride Not Recommended
Sodium Cyanide Not Recommended
Sodium Hydroxide Not Recommended
Tannic Acid Excellent Resistance
Soduim Nitrate Acceptable
Sulfuric Acid, Fuming Not Recommended
Sodium Phosphate Excellent Resistance
Sodium Sulfate, Silicate Not Recommended
Sodium Sulfite, Thiosulfate Not Recommended
Stearic Acid Excellent Resistance
Sulfur, Solid Not Recommended
Sulfur Chloride Not Recommended
Sulfur Dioxide, Dry Excellent Resistance
Sulfur Dioxide, Moist Not Recommended
Sulfur Trioxide, Dry Excellent Resistance
Sulfuric Acid, 78% or Less Not Recommended
Sulfuric Acid, 78% to 90% Not Recommended
Hydrochloric or Muriatic Acid Not Recommended
Sodium Hypochlorite Not Recommended
Ammonium Chloride Not Recommended
Glue Excellent Resistance
Potassium Cyanide Not Recommended
Acetate Solvents Excellent Resistance
Acetic Acid, 20 % Not Recommended
Acetic Acid, 50% Not Recommended
Acetic Acid, Glacial Not Recommended
Acetone Excellent Resistance
Acetylene Explosive!
Alcohols Excellent Resistance
Aluminum Chloride Not Recommended
Aluminum Sulfate Not Recommended
Picric Acid Not Recommended
Ammonia,Moisture-Free Excellent Resistance
Phosphoric Acid Not Recommended
Ammonium Hydroxide Not Recommended
Ammonium Nitrate Not Recommended
Aniline and Aniline Dyes Not Recommended
Barium Chloride Not Recommended
Barium Sulfide Acceptable
Beer Excellent Resistance
Beet Sugar Syrup Acceptable
Benzine Excellent Resistance
Benzol Excellent Resistance
Boric Acid Excellent Resistance
Butane Excellent Resistance
Calcium Bisulfite Not Recommended
Ammonia, Moist Gas Not Recommended
Liquor, White Not Recommended
Calcium Chloride (acid) Not Recommended
Hydrofluoric Acid Acceptable
Hydrofluosilicic Acid Not Recommended
Hydrogen Excellent Resistance
Hydrogen Peroxide Not Recommended
Hydrogen Sulfide,Dry Not Recommended
Hydrogen Sulfide, Moist Not Recommended
Lacquers Excellent Resistance
Lacquer Thinners Excellent Resistance
Lactic Acid Not Recommended
Linseed Oil Excellent Resistance
Potassium Chloride Not Recommended
Liquor,Green Not Recommended
Glycerine Excellent Resistance
Magnesium Chloride Not Recommended
Magnesium Hydroxide Acceptable
Magnesium Sullate Not Recommended
Mercury, Mercury Salts Not Recommended
Milk Excellent Resistance
Molasses Excellent Resistance
Natural Gas Excellent Resistance
Nickel Chloride Not Recommended
Nickel Sulfate Not Recommended
Nitric Acid Not Recommended
Oleic Acid Not Recommended
Oxalic Acid Not Recommended
Liquor,Black Not Recommended
Ammonium Sulfate Not Recommended
Applications
Bearings
Block
Bushing
Bushings
Gear
Gears
Gun Mounts
Hanger Diaphram
Marine Castings
Plug
Plunger Cup
Great Castings
         St. Paul Foundry 954 Minnehaha Ave West St. Paul MN 55104 651-488-5567 www.stpaulfoundry.com
Banner
Banner
St. Paul Foundry
954 Minnehaha Avenue West
Saint Paul, Minnesota 55104
(651) 488-5567  Fax: (651) 488-0908
Sales: (651) 312-4734 email

Site Map      Copyright 2017

Alloy Guide Sheet Terms of Use

Use Good Design Principles

1. St. Paul Foundry is providing this information on metal characteristics for informational purposes only. Before making a final decision on alloy selection consider the following and all other appropriate design and specification principles. Please note that this is not an exhaustive list.

2. Consult the appropriate specification from an accredited specifying body (ASTM, SAE, Federal or Military) to determine current minimum values of this alloy.

3. Use appropriate design safety factors.

4. Use Failure Modes and Effects Analysis to help identify possible weaknesses in designs and specifications.

5. Use computerized stress analysis tools.

6. Use appropriate certification requirements for your casting suppliers. These may include test bars, chemical certifications, radiography, dye penetrant or other non-destructive testing methods.

7. Test your design to failure in a controlled environment. Then test it to failure in a simulation of its end use.

8. You and you alone are responsible for the suitability of your design and the materials that you select.

Disclaimer

WHILE EVERY EFFORT IS MADE BY ST. PAUL FOUNDRY (SPF) TO ENSURE ACCURACY, THIS INFORMATION IS PROVIDED FOR GENERAL INFORMATION PURPOSES ONLY AND NOT FOR ANY OTHER PURPOSE. BY ACCESSING THIS INFORMATION, YOU AGREE THAT IT MAY BE REVISED AT ANY TIME, IT IS PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, THAT NO WARRANTY OR REPRESENTATION IS MADE ABOUT ITS CONTENT OR SUITABILITY FOR ANY PURPOSE, AND THAT SPF EXPRESSLY DISCLAIMS WARRANTIES OF MERCHANTABILITY AND FITNESS. YOU ASSUME ALL RISK AND LIABILITY FOR ANY LOSS, DAMAGE, CLAIM, OR EXPENSE RESULTING FROM YOUR REVIEW, USE, OR POSSESSION OF THIS INFORMATION.